Because it can take longer to start, larger duct collectors often are simply left on while you work. Most dust extractors have this AC outlet built-in. A shop vac is strong enough to get the majority of dust, though. ![]() Dust collectors are simply able to pull air and dust at a much greater CFM (cubic feet per minute). The filtering capability of even the best shop vac is not nearly as strong as even a small dust collector. A dust collector has a large collection bag and sometimes uses 55-gallon drums or even garbage dumpsters at large shops. A single session of planing a few boards can fill a 16-gallon shop vac. You will have to empty the vacuum much more often vs using a dust collector. Using a shop vac with stationary tools works reasonably well. Whenever I move my shop vac and miter saw to a jobsite, I always use two extension cords and run to two different circuits to avoid tripping breakers. ![]() My shop vac (which sits underneath my miter saw) runs on a separate circuit so it doesn’t trip the breaker when I use them at the same time. When I had my house rewired, the electricians installed a dedicated circuit for my miter saw, which draws 15 amps. However, I use a dedicated shop vac for my miter saw. In my limited space, I have a dust extractor near my workbench for the track saw. They have a lot of technology built-in, such as the HEPA filters, self-cleaning filters, and auto start features which make them more expensive. You may pay anywhere from $400 to even $600. It typically costs about 3 to 4 times more than a shop vac. If there is any other issue with the dust extractor, it is the price. I am choosing to take it as a sign they are not supposed to be used this way! The better solution is the shop vac or the dust collector. While you technically can find Frankenstein adapters and hoses together to make a dust extractor work on stationary power tools, I could not find any. dust ports such as many miter saws, table saws, band saws, or other stationary equipment. They are not a good solution for tools with larger 2-1/2 in. In the woodworking industry, they do the best job filtering out the ultra-fine dust particles that can escape a shop-vac or regular dust collector.ĭust extractors work really well with handheld power tools with built-in dust ports. Dust extractors are used on the jobsite to remove concrete dust at the source because of the carcinogenic nature of the dust. Hospitals, museums, and cleanrooms use them due to their HEPA filters and the highest level of performance at cleaning their air. Dust extractors are the most efficient and leave the air the cleanest. There is a third option, however-a dust extractor. When it comes to removing dust at the source, most people decide on either a shop vac vs a dust collector. It is too late once it is already floating around in the air, on your stuff, and in your lungs. I find it’s more efficient to capture dust at the source using a dust collector. The second uses an air filter/purifier to filter an entire space or room. The first occurs at the source with a shop vac or dust collector.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |